Data-Sheet - Mitac PD10RI-N3060 (Intel DN2800MT3C) Half-Height (Intel Braswell N3060 2x2.48Ghz CPU, 10-19VDC) [FANLESS]

Mitac PD10RI-N3060 (Intel DN2800MT3C) Half-Height (Intel Braswell N3060 2x2.48Ghz CPU, 10-19VDC) [FANLESS]
[http://www.cartft.com/catalog/il/2970]

999.00 EUR
incl. 19% VAT, plus shipping

Intel Braswell !
Mini-PCI Express !
2cm height !
10-19VDC Input !

This board is produced by MITAC, the OEM producer of Intel DN2800MT. This board is based on Intel DN2800MT, but is equipped with the moderm Intel Braswell plattform. PD10RI is available until at least 2025.

Intel Braswell N3060 dual cores processor
Intel HD graphics and DriectX 11 support
Dual channel DDR3L with two connectors for MAX. 8GB memory
Triple independent display from HD-Out, VGA, and Embedded Display-Port* / LVDS connectivity
Features high speed Gigabit Ethernet connection
Features 2 SATA 3Gb/s
Four Hi-Speed USB3.0 ports support
Two Power RS232
One PCIe connector for the future Add-in card
Two PCI Express Mini Card connector for expansion card
8 V to 24 V wide-range voltage input via back-panel DC jack or internal power connector

Form Factor	Low-profile Mini-ITX (20 millimeters [0.79 inches] x 170.18 millimeters [6.7 inches] x 170.18 millimeters [6.7 inches])
Processor Chipset	Intel Braswell N3060 Processor with integrated graphics
Memory	Support for dual channel DDR3L 1066/1333 SO-DIMMs
	Support for up to 8 GB of system memory on a single SO-DIMM (or 4 GB each by 2 SO-DIMM)
	204-pin DDR3L SO-DIMM	2
Graphics	Integrated graphics:
	Digital displays (HD-Out)
	Analog displays (VGA)
	Internal flat panel displays:
	LVDS
	Embedded DisplayPort* eDP*
	External graphics support via a PCI Express 1.0a x1 graphics add-in card connector
Audio	2 + 2 Channel High Definition Audio ( HD Audio) using a Realtek* ALC888S audio codec supporting:
	Analog stereo line-out (back panel jack)

	In-chassis stereo speakers support (3 W/3 Ω via an internal header)
Expansion Capability	PCI Express x1 add-in card connector	1
	PCI Express Full-/Half-Mini Card slot	1
	PCI Express Half-Mini Card slot	1
Peripheral Interfaces	USB 2.0 front panel ports	5 (Headers)
	USB 3.0 back panel connectors (blue)	4
	SATA 3.0 Gb/s	2
	SATA 3.0 Gb/s port (multiplexed with an mSATA port, routed to the PCI Express Full-/Half-Mini Card slot)	1
Legacy I/O	Legacy I/O Controller (NCT6683D) that provides:
	Powered RS232	2
	Parallel port via an onboard header	1
	LAN Support	Realtek RTL8111G-CG Gigabit (10/100/1000 Mb/s) Ethernet LAN controller including an RJ-45 back panel connector with integrated status LEDs
BIOS	BIOS resident in a Serial Peripheral Interface (SPI) Flash device
	Support for Advanced Configuration and Power Interface (ACPI), and System Management BIOS (SMBIOS)
Hardware Management	Nuvoton NCT6104D based subsystem, including:
	Voltage sense to detect out of range power supply voltages
	Thermal sense to detect out of range thermal values
	3-pin system fan header
Power Requirement	DC connectivity via back-panel DC jack(2.5mm/ ID, 5.5mm/ OD)
	Internal 2 pin power connector
Environment	Operating Temperature: 0°C to +60°C
	Storage Temperature: -20°C to +70°C
Safety	CE
	FCC